Dyson

Dyson Airblade™ V

(Nickel/White)

Create space in your washroom

At just 10cm deep, the Dyson Airblade V hand dryer is slim and compact, so it leaves more room in your washrooms. And because it fixes to a back plate, it allows easy, self-service installation, maintenance and replacement.

 

Quietly refined

With reprogrammed digital motor technology and precision air apertures, the 1,000W Dyson digital motor V4 makes the Dyson Airblade™ V hand dryer 35% quieter than its predecessor.

Airblade™ technology scrapes away water at 690km/h

HEPA-filtered air is channelled up the machine by the motor, forcing sheets of filtered air through precision apertures at high pressure. Water is scraped from the hands at 690km/h.

Dries hands at 549km/h with the Dyson digital motor V4

The reprogrammed Dyson digital motor V4 uses digital pulse technology to draw up to 20 litres of air per second through the machine, for fast hand drying.

HEPA-filtered air

The HEPA filter captures 99.95% of particles up to 0.1 microns4, including bacteria and viruses5 from the washroom air, before it's blown on to hands. So hands are dried with cleaner air, not dirty air.

1 Dry time determined using Dyson test method 769 based on NSF P335 using a measurement of 0.1g residual moisture.
2 Refers to owner's manual for specific warranty terms and conditions.
3 HEPA filter tested to EN1822-5, by an independent testing laboratory, under prescribed test conditions. Test Report Number: 16587A/16495A/18959B
4 Tested by an independent laboratory, under prescribed test conditions, using the bacteria Brevundimonas diminuta and the virus MS-2 coliphage.
5 Average electricity price HK$ 1.3/kWh as of December 2018. For calculations visit www.dyson.hk/calcs
6 The environmental impact of electrical appliances and paper towels was measured by Carbon Trust. The calculations were produced using the software Footprint Expert Pro, based on product use over 5 years and using weighted averages of individual countries of use. Dry times for product were evaluated using DTM 769.